Low Level Fork Mounted Skip

£1,426 .25 Excl. VAT £1,711.50 incl. VAT RRP: ~~£1,799.00~~ You save £372.75 (21%)

Brand: Leachs SKU: LH-2315

Available with and without Tipping operation
Two different sizes available
Form Mounted

Read complete description

Size: Manual - 1380mm x 910mm

Variant

Quantity:

£1,799.00 £1,428.74 excl. VAT

Low Level Fork Mounted Skip - £1,426.25 excl. VAT

BIGBEN® Ultra Gloves - £2.49 excl. VAT

This fork mounted skip is available with and without tipping capability.

Low loading height
Reinforced leading edge and body sides
4-way fork pocket entry
Secondary Locking Mechanism to prevent accidental discharge
Fully seam welded for retention of fluids
Manual handle override
Maximum fork section 150 x 60 mm at 683 mm centres
Zinc plated twist screws for safe attachment to truck
Painted bright orange for safety

Buy your Low Level Fork Mounted Skip from Leach’s today. If you need any further information, please don’t hesitate to contact our helpful sales team on +44 (0) 1432 346 800.

TO OPERATE VIA RELEASE HANDLE: Position the forks the correct distance apart to locate into fork pockets.
Remove fork pocket heel pins from skip.
Drive forks into the fork pockets.
Insert fork pocket heel pins directly behind the heel of the fork and attach safety lynch pin into the hole provided.
Take the forklift skip to the intended area to be tipped and release the secondary lock mechanism on the rear.
To release the skip and empty the contents pull the release handle.
Once emptying is complete pull the skip back so as to re-latch on to the hook
Replace the safety lock mechanism.
The skip is now ready for use again.
TO OPERATE VIA AUTO-RELEASE: Follow steps 1-4 above and then: Take the forklift skip to the large yard skip and release the secondary lock mechanism on the rear of the skip.
Position the forklift skip at the correct height with the actuator plate positioned over the yard skip side (the actuator plate is located between the two side entry fork pockets).
Lower the forklift skip on to the side of the yard skip until the hook release mechanism is disengaged.
Raise the forklift to clear the side of the yard skip, pull away and lower safely to the ground. Once emptying is complete pull the skip back so as to re-latch on to the hook.
Replace the safety lock mechanism.
The skip is now ready for use again.